KERDI, DITRA and Nuheat tile products. The Schluter Experts!
Schluter Systems Kerdi Water Proofing Membrane
Kerdi Water Proofing Membrane sold per Square Foot
KERDI WATERPROOFING MEMBRANE
Kerdi Membrane for waterproofing your shower, wall, Floors. Sold by the Roll. The price listed is per Roll.
This is Kerdi Membrane sold by the Square Foot., the width is 3.29 feet or 39.5".
To calculate square footage, take length x width.
Apply a thin-set mortar that is suitable for the substrate.
Press Schluter-KERDI fully into the mortar.
Work the KERDI into the mortar by applying pressure to the membrane with a flat side of the trowel.
Tile can be installed over Schluter-KERDI using an unmodified thin-set mortar.
Schluter-KERDI is a bonded waterproof membrane with limited crack-bridging capabilities. It is made of soft polyethylene, which is covered on both sides with a special fleece webbing to anchor the membrane in the thin-set mortar.
Schluter-KERDI was developed as a waterproofing membrane to be used in conjunction with ceramic and stone tile coverings. Tiles can be installed directly on Schluter-KERDI using the thin-bed method. Other trowel-applied covering materials, such as plaster, can also be used.
Pre-cut sections of Schluter-KERDI are available for inside and outside corners, as well as for pipe collars. Use Schluter-KERDI-BAND, in widths of 5" (12.5 cm), 7-1/4" (18.5 cm), or 10" (25 cm) to seal butt joints or corner joints. Schluter-KERDI-FLEX, in 5" (12.5 cm) or 10" (25 cm) widths, is used to seal expansion joints or flexible edge joints.