Safe for Porous Stone - Dilutable for Everyday Use
The Tile Doctor Advanced Tile and Stone Cleaner is a concentrated formula effective on tough jobs or can be diluted for everyday use. The neutral pH formula is a multi-purpose cleaner that prevents buildup on surfaces when used regularly.
USES: Use on natural stone, marble, granite, limestone, brick, slate, saltillo, ceramic, porcelain grout and masonry surfaces.
APPLICATION: Read entire label before using. Remove surface debris. For everyday cleaning mix 4 to 6 ounces of Advanced Tile and Stone Cleaner per gallon of water. For tougher stains use up to 1 part Advanced Tile and Stone Cleaner to 3 parts water. Apply to surface with a mop or sponge and allow to soak for 1-2 minutes. Agitate the surface with a mop, brush or sponge to loosen accumulation or stains. Refresh with clean solution as needed. Do not allow solution to dry on surface. Mop up remaining dirty solution. Clean applicator and containers with water after each use.
TEST A SMALL AREA according to application instructions to determine desired results.
CAUTION: MAY BE HARMFUL IF SWALLOWED. May be irritating to eyes and skin. Contains surfactants. Rubber gloves should be worn during application. IF INGESTED: if person is conscious, do not induce vomiting and immediately give 2 glasses of water. Seek medical attention. EYE CONTACT: Flush with water for 15 minutes. If irritation persists, seek medical attention. SKIN CONTACT: Wash immediately with soap and water. If irritation persists, seek medical attention. INHALATION: relocate to fresh air. If symptoms persist, seek medical attention.
HANDLING AND STORAGE: Close container tightly after each use. Store in original container in a cool, dry area. Dispose of residue or any unused leftover product in accordance with applicable federal, state, and local requirements.
Sign In
ProSource Center is Upfront