Categories

Abrasives

Adhesives, Sealers & Cleaners

Automotive

Carpet / Rug Pad

Ceramic Tile

Ceramic Tile Cleaners / Sealers

Closeout

Cove Base - Vinyl & Rubber Trim

Grout, Mortar & Caulk

Hardwood Floors, Vents

Kerdi Shower Kits - Waterproofing

Laminate Flooring

Laminate Pad

Poly-Brush & Rollers

Power Tools

Radiant Underfloor Heating

Schluter - Kerdi - Ditra - Profiles

Shower Shelves, Benches & Niches

Tile Accessories

Tools

Vinyl Floors

Visa MasterCard Discover American Express
Secured by Rapid SSL ProSourceCenter is an Upfront Merchant on TheFind. Click for info.

Schluter Systems Kerdi Waterproofing Membrane Sheet

$1.81

Schluter Systems Kerdi Waterproofing System Membrane sold per square foot

  • Kerdi Membrane for waterproofing your shower wall and floors
  • The width of each sheet is 3.29 feet or 39.5"
  • Order as many square feet as you need
  • Enter your square footage in the Qty box

Kerdi Waterproofing Membrane Sold per Square Foot

Schluter-KERDI

This is Kerdi Membrane sold by the Square Foot. The width of each sheet is 3.29 feet or 39.5".

To calculate square footage, take Inches length x width needed and divide by 144 and round up. If working with feet, take your linear feet needed and multiply by 3.3 and round up. For example, 5 Linear feet x 3.3 feet width = 16.5 SF round up to 17 SF to order.

Function

Schluter-KERDI is a bonded waterproof membrane with limited crack-bridging capabilities. It is made of soft polyethylene, which is covered on both sides with a special fleece webbing to anchor the membrane in the thin-set mortar.

Schluter-KERDI was developed as a waterproofing membrane to be used in conjunction with ceramic and stone tile coverings. Tiles can be installed directly on Schluter-KERDI using the thin-bed method. Other trowel-applied covering materials, such as plaster, can also be used.

Pre-cut sections of Schluter-KERDI are available for inside and outside corners, as well as for pipe collars. Use Schluter-KERDI-BAND, in widths of 5" (12.5 cm), 7-1/4" (18.5 cm), or 10" (25 cm) to seal butt joints or corner joints. Schluter-KERDI-FLEX, in 5" (12.5 cm) or 10" (25 cm) widths, is used to seal expansion joints or flexible edge joints.

Installation sequence

Kerdi Install Step 1

1. Apply a thin-set mortar that is suitable for the substrate.

Kerdi Install Step 2

2. Press Schluter-KERDI fully into the mortar.

Kerdi Install Step 3

3. Work the KERDI into the mortar by applying pressure to the membrane with a flat side of the trowel.

Kerdi Install Step 4

4. Tile can be installed over Schluter-KERDI using an unmodified thin-set mortar.

You may also be interested in:

Copyright © 2012-2015 Pro Source Center